Product Usage

Step 1. Preparation After removing the lens, clean and rinse it with MeniCare Pure or MeniCare Plus, then store it in the lens holder. Step 2. Filling MeniLAB Fill the original lens container with MeniLAB up to the neck. Step 3. Soak the lenses Screw the lens holder onto the container. Leave the lens to soak in MeniLAB for 5 minutes for the disinfection stage. Step 4. Rinse the lenses Rinse the lens carefully for about 15 seconds with MeniCare Pure or MeniCare Plus. Rinse the lens holder and lens container too. Step 5. Store the lenses Fill the container with MeniCare Pure or MeniCare Plus. Screw the lens holder onto the container and store the lens like this until the next test. In the event of extended soaking, renew the soaking solution every 4 weeks Step 6. Before fitting Before fitting, rinse the lens with MeniCare Pure or MeniCare Plus. Do not use for soft lenses. The soaking time for trial lenses in MeniLAB must not exceed 1 hour. Longer than that, the quality will not be affected but the lenses may be discolored. Important: do not swallow. Do not leave within reach of children. It is essential to rinse the lenses abundantly with MeniCare Pure or MeniCare Plus after soaking them in MeniLAB. Do not put the solution directly in your eye. In the event of accidental splashing, rinse abundantly immediately. Avoid contact with the skin and do not splash onto clothing. Store at room temperature (15-25℃). Close the container properly after use. Use within 3 months after opening. Respect the expiry date noted on the container. Never use tap water to rinse your lenses