Product Usage

FOR REMOVAL of rigid gas permeable / scleral contact lenses:

1. Wash and dry hands thoroughly before handling contact lenses or the remover.

2. Moisten the cup of the remover (with saline or contact lens solution).

3. Compress the handle and carefully center the cup squarely on the contact lens.

4. When the cup has been seated on the lens, release the compression pressure to apply suction.

5. Gently retract the lens.

6. Always be aware of the position of the lens before applying the remover.

7. Remove the lens from the cup by squeezing the handle to release suction.

FOR INSERTION:

1. Hold the remover lightly by the sides of the handle.

2. Place the properly prepared wet lens on the cup.

3. Position the contact lens on the surface of the eye and release.

Care: Regularly clean with soap/water or contact lens solution. Allow to air dry. Replace 6 monthly to prevent infection and bacterial build up.

Warnings:

- In the event of mistaken application to the eye, squeeze the handle to release suction.

- Do not use this product with diseased, injured or otherwise compromised eyes.

- Do not use this product with soft contact lenses.

- Some products contain natural rubber latex which may cause allergic reactions - check with manufacturer.

- CHOKING HAZARD: Keep this product away from small children.